Retro Friday: BIM Execution How-to-

I'm bringing this to the top because I hear people talking about it almost daily.

BIM Execution Plans (BxP)are the foundation of you successful use of BIM. I'm given pause by how regularly they are just slapped together because they were "required on the project."

This is your roadmap folks. This is what you will point back to when the going gets tough.

• When you have physical conflicts in the field, you will point to the model.
• When you have conflicts in the model, you will point to the matrix that show what trade takes precedent in that situation.
• When you have conflicts of interest and personality, you will point to your BxP. Or at least you should. You won't be able to if you didn't take the time to assemble it in a meaningful manner.

The document mentioned in the post below isn't about how to fill out your Modeling matrix, or who should do what task when. It's about how to have a conversation about these things. Consider it the form work for your projects foundation.

BIM Execution How-to  April 10, 2012

Your map to sucessful BIM projects

Retro Friday- The BIMWashers are still with us.

A post on the Linked In group "Epic BIM" (founded by the guys at Epic BIM, funnily enough) prompted me to look back at a blog post from waaaay back in 2009.

Sad to say, I could have written this post yesterday. I'm not pointing that my writing hasn't improved (that's a given) just that I still see these attitudes today.

I'm actually kinda surprised how many people are still in the "adoption" phase of some sort of BIM process. Even more surprising are those that are still debating the value and consider it the next "fad."  Eh, big ships are slow to turn I guess.

Enjoy some "vintage" Big Bad BIM...
BIMwash- the new snakeoil?

Revit Technology Conference North America an Abridged retelling

Note:You would think I could have gotten this posted sometime yesterday, but as I was proofing I got involved in some good API conversation with Matthew Nelson (BIM Manager at Evergreen EDC @MattBeNimble) then lost WiFi and just never got to hit *post*  Better Late than never.

My plans to blog daily from RTCNA were shot down by spotty WiFi in the hotel room. I never had more than 15 mins of continuous connection.  Anytime I went to the lobby, I was far to involved in Revit/BIM conversations to think about how to capture the event on the blog.  Even now, as I sit in the hotel lobby, some of the best Revit minds in the industry are having off the cuff brainstorming and collaboration sessions as they wait their time to leave. Twitter tells me that the airport would be just as conversation rich.  So, I will try to capture the conference in a few paragraphs for now and expand later.

As far as sessions go, per usual, they were the top live learning resources on Revit and BIM in the wild available.  I did walk out of one class, but that was made possible by realistic representation of the course by the instructor.  They stated that "if you have ever done this task in Revit, you're not going to learn much here and anything you haven't seen before you could pick up from the handout." Great attitude at an intermediate to advanced technology conference.

Frankly, if you could only go to one Revit related conference a year, I would recommend the Revit Technology Conference closest to you. Seriously, The caliber of presenters, and the sessions offered will inspire the motivated beginner to seasoned professional alike.  I won't go into sessions specifics, but Revit cows and elephants, Data mining, Curtain wall modeling to fabrication and hacking Revit to bend to your will were found around every corner....

Vancouver and specifically Westin Bayshore had a lot to offer. Being a intimate event (440 registrants as opposed to close to 10,000 at Autodesk University (I'm sure if I'm far wrong on that number someone will let me know)) allows for a smaller venue with rooms and conference center within easy walking distance.  The RTCNA committee and Sponsor IMAGINiT snagged a great place for the Friday evening party- The Vancouver Aquarium.  Dolphin Show, open exhibits to wander, even tables nestled among sea-life exhibits.  Good times.

Anyway, more to come... In the mean time, enjoy the sealife--

Revit Technology Conference North America (Day 0 Recap)

A Bad BIM, a Twice Roads Fool, a Revit OpEd, a Revit Tyeten, and a Revit Kid walk into a bar...

Wait, is this a joke?  Well, maybe... but it's also Revit Technology Conference North America 2013 (hereafter known as RTCNA) in beautiful Vancouver B.C.

Just about everyone has cleared customs or snuck across the border (as the case may be,) presentations were polished up into the wee hours of the morning (as bottles of spirituous libations were polished off (or so I've heard.)) and as the sun rises the AEC world waits anxiously to see how it's face will be forever altered.  Ohhhh, the hyperbole.... Seriously though, looking at the speakers list, the attendees, the topics and the venue, this conference is shaping up to be stellar.

It was great to touch base with old friends and new last night. I look forward to catching up with others as the week goes on.

My advice to get the most of this conference is directly hijacked from Aaron Maller; "Conference hard, play harder, swim faster, caffienate, and screw sleep. Sleep is for quitters."   Oh, and stay away from #TerminalD  ;)

See you around the hallways everyone. Let's do this.